1.4404–X2CrNiMo17-12-2–AISI/SAE316L1.4404或316L奧氏體不銹鋼材質AISI因其鉻和鉬含水量高，碳含水量低，316型兼具優秀的耐酸性性性。針對大孔徑，熱處理構造約為600MPa，因為針對小斷面，可憑借螺母化來上升。不銹鋼材料有各種各樣合格證的庫存管理從何而來，已經各不相同的成品文件后綴或狀況，使您也會是最好的地滿足需要您的制定標準。企業的服務平臺也會設計或弄成一小片。數據命名：W、 號1.4404–1.4401（316）–US S31603–316L條件：ISO7153-1、ASTM F899、NF S94-090、NF EN 10088-3和-2、ASTM A479、ASTM A276、X2CrNiMo17-12-2–AFNOR Z3CND17-11-2–BS 316S31

MATERIAL SPECIFICATIONS:BS EN10083-3 (2005)

CHEMICAL COMPOSITION (WEIGHT %)

C(％): ≤0.030Si(％): ≤1.00Mn(％):≤2.00P(％)≤:0.045S(％)≤:0.030Cr(％): 16.5～18.5Ni(％): 10.0～13.0Mo(％):2.00～2.50Other(％): N≤0.11

MECHANICAL PROPERTIES( BAR/WIRE ROD ) AND INTERGRANULAR CORROSION RESISTANT TENDENCYVIASOLUTION TREATMENT

Thickness Diameter (d)/≤mm: 160Hardness HBS: 215Yield strength σ0.2≥/MPa: 200Tensile strength σb/MPa: 500～700Elongation δ(longitudinal )≥(％): 40Elongation δ(transversal )≥(％): -Impact absorbing energy Akv≥/J|longitudinal: 100Impact absorbing energy Akv≥/J|transversal: -Intergranular corrosion resistance tendency | condition of delivery: YesIntergranular corrosion resistance tendency | condition of welding: YesThickness Diameter (d)/≤mm: 160<d≤250Hardness HBS: 215Yield strength σ0.2≥/MPa: 200Tensile strength σb/MPa: 500～700Elongation δ(longitudinal )≥(％): -Elongation δ(transversal )≥(％): 30Impact absorbing energy Akv≥/J|longitudinal: -Impact absorbing energy Akv≥/J|transversal: 60Intergranular corrosion resistance tendency | condition of delivery: YesIntergranular corrosion resistance tendency | condition of welding: Yes重點應用大多數軟件涉及自動化設備、紙業、變壓器油、機械鐘、草業食品類和醫療衛生健身器械相關行業的產品。種產品可用作大孔徑或小斷面的超調質(滲碳)的狀態。